T2(+) Bodycam does not respond in the Docking Station


If the T2(+) Bodycam behaves oddly, or does not respond properly when buttons are pressed, you can reset the T2(+) by pressing the button (6) on the back of the camera (no data and settings will be lost).



Please remind:

  1. Make sure the Zepcam T2(+) is not recording when docked.
  2. On the docking station, when the LED in front of the camera is Flashing Green/Red, an Error occurred and user interaction is needed. Remove the T2(+) from the docking station and place it again firmly in docking station (make sure the tilt stud is in the correct position when docked).