Update the T1 firmware

Follow


To update the T1, T1-XT & T1 LIVE firmware follow below steps.

 

ONLINE

  1. Make sure you’re logged in as Administrator.
  2. Make sure that the Zepcam T1 is connected via WiFi, 3G of 4G/LTE.
  3. Go to SETTINGS -> ADMINISTRATOR SETTINGS.
  4. Select FIRMWARE SETTINGS -> UPDATE FIRMWARE.
  5. The Zepcam T1 will reboot automatically.
  6. Check if the frimware is updated; Go to SETTINGS -> ADMINISTRATOR SETTINGS -> FIRMWARE SETTINGS and check the displayed firmware version

 

OFFLINE

  1. Go to Zepcam T1 Firmware to download the latest firmware and change the filename to ‘firmware.enc’.
  2. Make sure you’re logged in as Administrator.
  3. Make sure that the T1 is NOT connected via WiFi, 3G of 4G/LTE.
  4. Make sure that the Zepcam T1 is connected to the PC via USB (SETTINGS -> ADMINISTRATOR SETTINGS ->ATTACH TO PC). The Zepcam T1 will be displayed as external device/drive.
  5. Remove the old/current firmware file when available on the T1 external device/drive.
  6. Drag the new ‘firmware.enc’ file from PC to root folder of Zepcam T1.
  7. Close or disconnect Zepcam USB connection.
  8. Go to SETTINGS -> ADMINISTRATOR SETTINGS -> FIRMWARE SETTINGS -> UPDATE FIRMWARE.
  9. The Zepcam T1 will reboot automatically.
  10. Check if the frimware is updated; Go to SETTINGS -> ADMINISTRATOR SETTINGS -> FIRMWARE SETTINGS and check the displayed firmware version